Manufacturer’s no tes
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measu res:
1. Reorient or relocate th e receiving antenna.
2. Increase t he distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is con nect ed to.
4. Consult the dealer or an experienced radio/TV technician for help.
Please no te the following regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has bee n evaluated under FCC Bulletin OET 65C and found compliant w ith the
requirements as set f orth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF
Exposure from r adio frequency devices. The radiated o utput power of this radio device is far below
the FCC radio frequ ency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during normal operation is minimized. W hen using this device, a
certain s epa ration distance betw een ante nna and nearby persons must be maintained to ensure RF
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).
Regulatory Notes an d Statements
Radio device, health and authorisation for use
Radio-frequency electromagnetic energy is emitte d from the wireless devices. The energ y levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile pho nes. Radio devices are safe for use b y consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices m ay be restricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in wh ich the policy regarding use of rad io devices in specific environments is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, priva te buildings), obtain
authorization to use these devices prior to operating the equipment.
Regulatory Informatio n/Disclaimers
Export restrictions
This product or s oftware contains encryption code w hich m ay not be exported or
transferred from the US or C anada without an approved US Department of Commerce
export license. This device complies with Pa rt 15 of FCC Rules, as well as ICES 003 B
/ NMB 003 B. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu ma y invalidate the user’s
right to operate this equipment.
88 Fujitsu
To Next Page
Loading...
