Fujitsu LifeBook E752 - Preface; About This Guide

8
LIFEBOOK E/P/S/U BIOS Guide
Drive Configurations Submenu of the System Menu
The Drive Configurations submenu identifies the installed S-ATA drive(s).
Figure 3. Drive Configurations Submenu
Exiting from System Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to move to another menu, tap the desired menu name at the top of the screen.
Table 3: Fields, Options and Defaults for the Drive Configurations Submenu of the System Menu
Menu Field Options Default Model Description
Drive0:
 Disabled
 Enabled
[Enabled] All Enables and disables the SATA Port 0 (HDD).
Drive2:
 Disabled
 Enabled
[Enabled] E752, S752,
S762, P702,
P772
Enables and disables the SATA Port 2 (ODD or HDD).
Drive4:
 Disabled
 Enabled
[Enabled] E752, S752,
S762
Enables and disables the SATA Port 4 (eSATA).
Drive5:
 Disabled
 Enabled
[Enabled] E752, S752,
S762, P702,
P772
Enables and disables the SATA Port 5 (eSATA).
Note: For E752 and S752, it is the eSATA of the port
replicator.
Phoenix SecureCore(tm) Tiano Setup
Item Specific Help
Enable/disable SATA
device.
Drive Configurations
Drive0: [XXXXXXXX (XXX)]
[Enabled]
Drive2: [XXXXXXXX (XXX)]
[Enabled]
Drive4: [XXXXXXXX (XXX)] ]
[Enabled]
Drive5: [XXXXXXXX (XXX)] ]
[Enabled]
System
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select ► Sub-Menu
F9 Setup Defaults
F10 Save and Exit
/
/