Fujitsu LIFEBOOK NH532 - Initial Start-Up; Activate Additional Utilities, Applications, & Drivers

3
Display Cover
Power/Suspend/
Resume Button
LAN Jack
You cannot use your LIFEBOOK until you have
accepted the license agreement. If you stop the
process your LIFEBOOK will return to the beginning
of the Windows
®
Welcome Process, even if you
shut your LIFEBOOK down and start it up again.
1. Open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and
that the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing
angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Booting the System
• We strongly recommend that you not attach any external
devices and do not put a DVD/CD in your drive until you
have gone through the initial power on sequence.
• Press the Power/Suspend/Resume button.
• The LIFEBOOK is now on and the battery is
being charged.
• When you turn on your LIFEBOOKforthersttime,itwill
display a Fujitsu logo on the screen. If you do nothing
the system will load the operating system, and then the
Windows
®
Welcome will begin.
4. Starting Windows
®
for the First Time
• Afteryoubootupthesystemthersttimeandfollowthe
instructions on the screen, you will eventually come to
the Sign-In screen which prompts you for your User name.
After the Sign-In Screen appears, the screen will black
out for up to several minutes. This is normal. DO NOT
ATTEMPT TO POWER DOWN THE SYSTEM
AT THIS POINT. While the screen is blacked out, your
systemcongurationisbeingsetupandthenecessary
lesarebeinginstalled.
• Duringthecourseoftherststartup,youwillneedtoread
and accept the End User License Agreements (EULAs) for
Microsoft and Fujitsu.
• Followingrstboot,youwillarriveattheNewWindows
UI start screen. Some useful shortcuts for your reference:
Press the Windows + D key to go to traditional Windows
desktop. Press Windows + M key to load the traditional
Windows desktop and minimize all applications.
5. Connect to the Internet or Network
• Turn on wireless by pressing the Function (Fn) and F5 key
or—
• Connect an Ethernet cable (not supplied) to the LAN jack
on your notebook and to a wall jack or to Ethernet router.
• Register your LIFEBOOK with Fujitsu Service and Sup-
port via our website (us.fujitsu.com/computers). This
helps us to better serve you.
6. Activate Additional Utilities,
Applications, & Drivers
• Double-click the Fujitsu “BonusApps” icon on your desktop
to access bonus software applications which you can
install. You can select all, a few, or none.
• Go to the Fujitsu support site (http://solutions.us.fujitsu.
com/www/content/ support/) to download Fujitsu Software
Download Manager (FSDM). It can be used to download
the latest drivers.
Initial Start Up
Status Indicator Panel
Touchpad Pointing
Device
AC Adapter
DC Power Jack