67
- Lithium ion Battery
Swapping Batteries when another Power Source is available
To swap batteries in your battery bay when you have an additional power source (such as an AC Adapter),
follow these easy steps:
1 Plug in an AC Adapter to ensure power is supplied to the system.
2 Slide and hold the battery release latches to open the bay.
3 Remove the battery from the bay.
4 Slide the new battery into the bay.
IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR
NOTEBOOK OR CHARGE YOUR BATTERY.
To Next Page
Loading...
