6
LifeBook S Series Notebook BIOS
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what Serial ATA/IDE
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Figure 2. Drive0 Submenu
Menu Field Options Default Description
Type:
■
Auto
■
None
[Auto] Select Auto to have the type of Serial or Parallel ATA device auto-
matically identified by the BIOS at POST. If None is selected, the fol-
lowing Set-up items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors:
---
--- The total number of sectors on your hard disk
Maximum
Capacity:
---
--- The maximum capacity of your hard disk
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [FUJITSU MHV2040BH]
Type: [Auto]
LBA Format
Total Sectors: 78140160
Maximum Capacity: 40008MB SATA1
▲
To Next Page
Loading...
