23
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 16. Hard Disk Security Submenu
* “Drive[X]” references apply to all drives listed on this screen.
Table 16: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Drive[X]*:
___
Clear Display-only. Default is Clear. When the Drive[X] Password has been set, the
field changes to Set. When this password is set, the primary hard disk drive can-
not be used in another system unless the password is entered.
Set Master
Password
___
[Enter] Sets, changes or cancels the Drive[X] Master Password. The Drive[X] Master
Password may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. When a Drive[X]
Password is set, it must be used to access the hard drive if it is used in another
system. Note that the password will not take effect until the system has been
rebooted. The Master Password does not provide security; it simply allows the
user to set the User Password, which provides true security.
Set User Password
___
[Enter] Sets, changes or cancels the Drive[X] User Password. The Drive[X] User Pass-
word may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case-sensitive. When a Drive[X]
Password is set, it must be used to access the hard drive if it is used in another
system. Note that the password will not take effect until the system has been
rebooted.
Password Entry on
Boot:
Disabled
Enabled
[Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS
boot. (The hard disk is still password-protected without password entry.)
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific HelpHard Disk Security
Drive0: Clear
Set Master Password [Enter]
Set User Password [Enter]
Drive2: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Drive4: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Drive5: Not Available
Set Master Password [Enter]
Set User Password [Enter]
Password Entry on Boot: [Enabled]
Configure hard disk
security feature.
Phoenix SecureCore(tm) Tiano Setup
Info System Advanced Security Boot Exit
Security Menu
To Next Page
Loading...
