Fujitsu Lifebook T4310 - Page 102

102 - Device Ports
Headphone Jack
7KHKHDGSKRQHMDFNDOORZV\RXWRFRQQHFWKHDGSKRQHVRUSRZHUHGH[WHUQDOVSHDNHUVWR\RXU7DEOHW3&
<RXUKHDGSKRQHVRUVSHDNHUVPXVWEHHTXLSSHGZLWKD´PPVWHUHRPLQLSOXJ,QRUGHUWRFRQQHFW
KHDGSKRQHVRUVSHDNHUVIROORZWKHVHHDV\VWHSV
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
T
HE 1394 PORT USED IN THIS SYSTEM USES A FOUR-PIN CONFIGURATION. IF YOU INTEND TO
INTERFACE WITH DEVICES WHICH USE A SIX
-PIN CONFIGURATION, YOU WILL NEED TO PURCHASE AN
ADAPTER
.

,QRUGHUWRFRQQHFWDGHYLFHIROORZWKHVH
VWHSV
1 Align the connector with the port opening.
2 Push the connector into the port until it is
seated.
Figure 46. Connecting an IEEE1394 Device
IEEE 1394
Connector