Fujitsu Lifebook U729 - Connecting the Mains Adapter to the Port Replicator; Switching on the Notebook Via the Port Replicator

Working with the notebook
Connecting the mains adapter to the Port Replicator
3
1
2
► Connect the power cable (1) to the power
adapter provided for the device, see
chapter "
Technical data", Page 90.
► Plug the power cable into the mains
socket (2).
► Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (3).
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OFF button on the port
replicator to switch the notebook on.

The power-on indicator of the Port
Replicator lights up.
Fujitsu 55