Removing and installing components
during servicing
Attaching the cover
2
2
1
► Place the cover in t
he correct mounting position (1).
► Tighten the screws (2).
Finishing component removal
After you have
removed or changed the system components as you required, please
prepare your d
evice for operation again as follows:
► Install the ba
ttery again (see "
Installing a battery", Page 41).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect th
e cables that you disconnected before.
Fujitsu 77
To Next Page
Loading...
