Removing and installing components
during servicing
Installing and removing an M.2 m
odule
Removing a cover
1
1
2
► Remove the screws
(1).
Keep the screws i
n a safe place. If you are removing more than one component at
thesametime,s
tore the screws for the individual components separately from each
other. If you in
stall the wrong screws, components may be damaged.
The screws are
not all the same length and when the cover is installed,
the correct sc
rews must be used.
► Lift the cover off the notebook (2).
Fujitsu 75
To Next Page
Loading...
