Working with the noteb ook
Your Port Replicator
The P ort Replicator is a de vice that helps you to quickly connect your n otebook to
your peripheral devices, such as a monitor, printer etc.
The features offered by the Port Replicator include standard ports fo r
monitor, audio, mouse and keyboard.
You need only dock the notebook in order to work with your peripheral devices.
In addition to the port replicator with mechanical docking described here, this system
also supports optionally available USB type-C or Thunderbolt 3 Port Replicators
that are connected to the system via the USB type-C connector.
Ports on the Port Replicator
PortReplicatorPorts
13
1
2
3
12
11
10
9
8
7
6
5
4
1 = Headphone jack (left), microphone
jack (right)
2 = ON/OFF button
3 = Connector on the Port Replicator for the
docking port on the bottom of the notebook
4 = Key l ock (optional)
5 = Unlocking lever
6 = DC jack socket (DC IN)
7 = USB 3.2 Gen1 port w ith charging
function (USB Type-C™)
8 = USB port 3.2 Gen1 (USB Type-A)
9 = Displayports
10 = DVI-D monitor port
11 = VGA m onitor port
12 = LAN port
13 = Security Lo ck device
The DVI port and the neighbouring D isplayp ort cannot be used at the same time.
50 Fujitsu
To Next Page
Loading...
