Fujitsu LIFEBOOK U7510 - Installing an M.2 Module; Removing an M.2 Module

Removing and i nst a lling components
during servicing
Installing an M.2 module
► LIFEBO O K U751 0: If applicable, insert the M.2 adapter into the service compartment.
1
2
► Insert the M.2 m odule at a slight angle in the direction of the arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with th e screw ( 2).
Removing an M.2
module
2
1
► Undo the screw (1).

The M.2 module snaps slightly upwards.
► Pull the M.2 mo dule in the direction of the arrow (2) and out of the slot on
the mainboard and remove it from the casing.
Fujitsu 73