Connecting e xtern a l devices
USB port Intel® Thunderbolt
TM
3 with charging function
and display port (USB Type-C)
USB-AnschlussmitAufladefunktion(USBType-C)IntelThunderbolt
At this USB port, you can charge a connected USB device or operate devices
without additional power supply.
This is also possible with connected notebook computers by going to the BIOS Setup Utility
under the menu Advanced > Miscellaneous Configurations and activating the function USB Type-C
Power Delivery on System-Off. Instructions for how to call up and operate the BIOS Setup
Utility can be found in section "
Settings in BIOS Setup Utility", Page 7 5.
With the USB Type-C Port Replicator available as an accessory, the notebook
can be supplied with power via this USB port.
USB devices are hot-pluggable. This means you can connect and disconnect
the cables of USB devices w h ile the system is running.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the
external device.
► Connect the data cable to the USB po rt
Intel® T hunderbolt
TM
3 with charging
function and display port (USB Type-C)
of the notebook.
Fujitsu 65
To Next Page
Loading...
