Working with the notebook
Connecting the mains adapter to the P ort Replicator
3
1
2
► Connect the power cable (1) to the power
adapter provided for the device, see
chapter "
Technical data", Page 77.
► Plug the power cable into the mains
socket (2).
► Connect the mains adapter cable to the DC
jack (DC IN) of the Port R eplicator (3).
When the notebook is connected to a Port Replicator, the operating system crea tes
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This pro file will be loaded, as
soon as the notebook is conne cted to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OFF button on the port
replicator to switch the notebook on.
The power-on indicator of the Port
Replicator lights up.
Fujitsu 47
To Next Page
Loading...
