Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Sa ving Changes - sa ve ch
anges and exit BIOS Setup Utility
► To save th e c urrent menu settings and exit the BI OS Setup Utility,selectExit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the note book is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Cha nges – Discard c h anges without exiting
the BIOS Setup Utility
► To discard the changes you have m ade, select Discard Changes and Yes.
ThesettingsinplacewhenBIOS Setup Utility was called re main effective.
Yo u can now make additional settings in the BIOS Set up Utility.
► If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save cha nges without exiting
the BIOS Setup Utility
► To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch o ff your device, select Save Changes and Power O ff and Yes.
The changes are sa ved. Your device is shut down.
Fujitsu 65
To Next Page
Loading...
