42
- Using the Cursor Buttons
Clicking
Clicking means pushing and releasing a
button. To left-click, move the cursor to the
item you wish to select, press the Left
button once, and then immediately release
it. You can also left-click by moving the
cursor to the item you wish to select, then
tapping the cursor control once. To right-
click, move the cursor to the item you wish
to select, press the Right button once, and
then immediately release it.
Figure 17. Clicking
Double-Clicking
Double-clicking means quickly pushing
and releasing the left button twice. This
procedure does not function with the right
button. To double-click, move the cursor to
the item you wish to select, then press and
release the left button twice. You can also
double-click by moving the cursor to the
item you wish to select, then double-
tapping the cursor control.
Figure 18. Double-clicking
• IF THE INTERVAL BETWEEN CLICKS IS TOO LONG, THE DOUBLE-CLICK WILL NOT BE EXECUTED.
• PARAMETERS FOR THE BUTTONS CAN BE ADJUSTED FROM THE MOUSE DIALOG BOX LOCATED IN THE WINDOWS
CONTROL PANEL.
To Next Page
Loading...
