Why does my Fujitsu Laptop not start after switching it on?
Your Fujitsu Laptop might not start because the battery is dead. In this case, charge the battery or connect the AC adapter to the notebook. Also, ensure that the AC adapter is properly connected to the notebook.
How to fix wireless connection issues on a Fujitsu Laptop?
If the wireless connection is not working, switch the wireless component on. Also, check whether the wireless connection is enabled by the software.
What to do if the external monitor remains blank when connected to my Fujitsu Laptop?
If the external monitor remains blank, ensure the monitor is switched on. If power saving has been activated, press any key to continue. Adjust the brightness of the monitor if it is set too low. Also, check the AC cable and data cable connections to both the monitor and the Fujitsu Laptop, ensuring they are properly connected.
How to fix a Fujitsu LIFEBOOK U937 LCD screen that is difficult to read?
If the LCD screen is difficult to read due to reflected glare, turn the notebook or alter the tilt of the LCD screen. You can also increase the brightness of the screen.
What to do if my Fujitsu Laptop LCD screen remains blank?
If the LCD screen remains blank, press a key or touch the touchpad to check if the screen is switched off. If an external monitor or television is connected, press the key for changing over the screen output.
What to do if when I enter characters on the keyboard of my Fujitsu Laptop, only numerals are written?
If only numerals are written when you enter characters, the virtual number keys of your device are activated. Press the Num button to deactivate them.
What to do if my Fujitsu LIFEBOOK U937 stops working?
If your Fujitsu Laptop stops working, it might be in energy-saving mode, so end energy-saving mode. Alternatively, an application program may have caused the malfunction, so close the application program or restart the notebook. If the battery is dead, charge it or connect the AC adapter.
What to do if the printer does not print from my Fujitsu LIFEBOOK U937?
First, make sure that the printer is switched on and ready for operation. Then, check that the data cable connecting the notebook to the printer is properly connected. Finally, verify that the correct printer driver is loaded.
FCC Part 15 compliance statement for the FUJITSU LIFEBOOK U937.
Essential safety information and precautions for operating the notebook.
Safety guidelines specific to wireless components like Wi-Fi and Bluetooth.
Steps for unpacking and inspecting the device for any transport damage.
Procedures for connecting the AC adapter and initial device startup.
Provides information on the notebook's status indicators for power, battery, and drives.
Explains the usage of hot keys and function keys for quick access to features.
Details on charging, caring for, and maintaining the notebook's battery.
Setting up supervisor and user passwords in the BIOS for system security.
Warning that only qualified technicians should perform repairs to avoid hazards.
Steps to enter and navigate the BIOS Setup Utility interface.
Initial steps to take when a fault occurs and how to contact support.
General| Operating System | Windows 10 Pro |
|---|---|
| Graphics | Intel HD Graphics 620 |
| Display | 13.3-inch Full HD (1920 x 1080) |
| Processor | Intel Core i7-7600U |
| RAM | Up to 16GB DDR4 |
| Storage | 512GB SSD |
| Weight | Approx. 1.2 kg |
| Ports | USB 3.0, USB-C, HDMI, headphone/microphone combo |
| Wireless | Wi-Fi 802.11ac, Bluetooth |
To Next Page
