Troubleshooting and tips
The notebook does not start after switching it on
Notebook
Cause Tro ub lesho ot ing
The battery is dead.
► Charge the battery.
or
► Connect the AC adapter to the notebook.
The A C adapt er is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
The notebook stops wor
king
NotebookEnding
Cause Tro ub lesho ot ing
The notebook is in en
ergy saving mode.
► End energy saving mo
de.
An applicat ion pro
gram has caused the
malfunction.
► Close the application program or resta rt
the notebook (by restarting th e operating
system or switching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Connect the AC adapter to the notebook.
The printer does not print
Printerdoes
notprint
Cause Tro ub lesho ot ing
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to th e
documentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the w rong p rinter driver.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
62 Fujitsu
To Next Page
Loading...
