Tro ubl eshooting and tips
The wireless connection to a n et
work does not work
Thewireless connectiontoa networkdoes notwork
Cause Troubleshooting
The wireless component is switched off. ► Switch the wireless component on (see
"
Switching the wireless components on and
off", Page 3 7).
The w ireless component is switched on. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be found in the help files.
Smart Card reader is not
recognized
Cause
Troubleshooting
Smart Card inserted incorrectly. ► Make sure you have inserted your Smart
Card into t h e Smart Card reader with
the chip facing upwards / down ward s
(device-dependent).
► Check w he ther the Smart C ard you are
using is supported. Your Smart Card must
comply with the ISO standard 7816-1, -2,
-3 and -4.
Smart Card PIN forgotten
Cause
Troubleshooting
PIN forgotten ► If you are work
ing in a network, contact your
system admini
strator, who can unlock your
system with a
Supervisor PIN.
Smart Card lost
Cause
Troubleshooting
Smart Card lost. ► If you are working in a network, contact yo ur
system administrator, who can boot your
notebook with a Supervisor Smart Card.
Fujitsu 63
To Next Page
Loading...
