Fujitsu PlasmaVision P42HHA30WS - Connecting the Display to External Equipment (PC); PC Connection Guide

E-8
PC
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
•The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio output
To RGB output (DVI-D)
To RGB1 input
(DVI-D)
To audio
input
To RGB2
input
(mD-sub)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
* When inputting voice see “Selecting input terminals (page E-30)”
*Terminal layout may differ and functions may not be available with some models and some device options.
Bottom of Display
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
E-Plasma-wide2(0608) 03.10.3, 0:14 PMPage 8 AdobePageMaker6.5J/PPC