Fujitsu PlasmaVision P42HHA30WS - Adjusting Screen Position and Size (Position;Size Menu); Horizontal and Vertical Position Adjustment

E-22
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]
“POSITION/SIZE” selected from the main
menu screen
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
“Position” adjustment screen
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT







1
2
3
4
5
6
Press .
The main menu screen will appear.
Press or to select
“POSITION/SIZE”.
Each time you press or , one of the available
menus appears in the following sequence:
The POSITION/SIZE Menu screen will appear.
Press or to select
“Position”.
Press
.
The “Position” adjustment screen will appear.
Press , , or to
change position values.
: Moves screen up.
: Moves screen down.
: Moves screen to the right.
: Moves screen to the left.
Press to store.
Press
when you finish.
*Repeat steps 3 to 6 when you wish to make
changes to other options.
*When
is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
E-Plasma-wide2(19-25) 03.10.3, 0:17 PMPage 22 AdobePageMaker6.5J/PPC