Fujitsu PlasmaVision P42HHA30WS - Initialization of User Adjustment Value (Factory Default); Restoring Factory Default Settings

English
E-33
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)
1
“FACTORY DEFAULT” selected in the
main menu screen
Displays the message of whether to
proceed the initialization
Displays the message of having
completed the initialization
You can restore the values of the adjustment/setting made in the MENU to factory settings.
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
3
4
5
Press .
The main menu screen will appear.
Press or to select “FACTORY
DEFAULT”.
Each time you press or , one of the available
menus appears in the following sequence:
The FACTORY DEFAULT Menu screen will
appear.
Press .
• Displays the message of whether to proceed
with the initialization.
Press or to select the
Yes.
Press
.
•The message of having completed the
initialization will be displayed after initializing.
Press when you finish.
2
E-Plasma-wide2(30-33) 03.10.3, 0:19 PMPage 33 AdobePageMaker6.5J/PPC