E-5
English
Description of Input Terminals
DVI-D terminal (RGB1 INPUT/DVI-D)
Pin No. Input signal Pin No. Input signal
1 Red 9 —
2Green 10 Ground
3 Blue 11 —
4— 12—
5 Ground 13 Horizontal synchronization
6 Ground 14 Vertical synchronization
7 Ground 15 —
8 Ground Frame Ground
RGB2 input terminal (RGB2 INPUT/mD-sub)
Pin No. Signal
1 DCD (Data Carrier Detect)
2 RD (Received Data)
3 TD (Transmit Data)
4DTR (Data Terminal ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7RTS (Request To send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
RS-232C terminal (RS-232C)
B External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
*See the speaker instruction manual for more information.
C Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
*Terminal layout may differ and functions may not be available with some models and some device options.
E-MHD00893(03-05) 03.12.17, 12:45Page 5 AdobePageMaker6.5J/PPC
To Next Page
Loading...
