Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

CX2550/60/70 M4 Upgrade and Maintenance Manual 357
11 SXM2 extension tray
Safety notes
V CAUTION!
● Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
● Devices and components inside the server node remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
● For further information, see chapter "Important information" on
page 33.

Fujitsu PRIMERGY CX2560 M4 Specifications

General

Product Type	Server
Processor	Intel Xeon Scalable processors
Number of Processors	Up to 2
Memory Slots	24 DIMM slots
Management	ServerView Suite
Operating System Support	Windows Server, Linux, VMware
Form Factor	2U
Memory	DDR4
Chassis	2U
Power Supply	Redundant power supplies
Remote Management	Integrated Remote Management Controller (iRMC)