Fujitsu PRIMERGY TX100 S1 User Manual

TX100 S1 Options Guide 25
Main memory Extending/replacing the main memory
Figure 9: Inserting a memory module
Ê Carefully press the new memory module into the slot (1) until the fastening
tabs on both sides of it engage (2).
Ê Install the air duct (see section "Installing the air duct" on page 37).
Ê Close the server (see section "Closing the server" on page 38), connect it to
the power outlet, and switch it on.
/
0
0

Fujitsu PRIMERGY TX100 S1 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S1
Category	Server
Language	English