*1: By applying Internal HDD Unit Bay Conversion kit (PG-BC102), 5 inch bay x 2 can be converted to 3.5 inch x 3.
*2: Frequency will be changed by the spec of PCI card and number of cards mounted.
*Components installed as standard configuration marked in grey.
Remote Service Board PG-RSB103 1
RAID Ctrl 0-Channel 128MB PG-140D1 PCI-X/64bit Internal array
RAID Ctrl 2-Channel 128MB w/BBU
PG-142E3 PCI/64bit Internal array/External array
SCSI Ctrl U160 PG-128 PCI/64bit
Internal / External SCSI Controller
Fibre Channel Controller PG-FC107 PCI-X/64bit
Eth. Ctrl 1000-BASE-T Cu PG-1892 PCI-X/64bit
Eth. Ctrl 1000-BASE-SX Fibre LC PG-1882 PCI-X/64bit
Eth. Ctrl 1000-BASE-T Cu PG-1852 PCI/32bit
No AFT support
Eth. Ctrl 2x1000-BASE-T Cu PG-1862 PCI-X/64bit
*-：cannot be applied
*1: Frequency will be changed by the spec of PCI card and number of cards mounted.
2
52
3
3
4
-
-2
Mount Priority Mountable Cards
4
1
43
-
43
34
123
Bus
12
1-
--- -
PCI
64bit/
100MHz*1
64bit/
133MHz*1
32bit/
33MH
z
PCI-X
Remarks
123 4 5
Full Height
3.3V 5.0V
PCI Slot
Priority
Max No.
of Mount
2
2
4
2
3
2
4
1
21
12
1
-
-- 1
4
4
43
1
2
1
-
-
-
-
Configuration Diagram
CPU
Xeon®
3.60EGHz/3.2EGHz
/ 3EGHz (2MB)
PCI Slots
PCI5 64bit/33MHz
PCI4 64bit/133MHz *2
PCI3 64bit/133MHz *2
PCI2 64bit/100MHz *2
PCI1 64bit/100MHz *2
5 inch Bay 3
5 inch Bay 2
5 inch Bay 1
CD-ROM Drive / FDD
Hard Disk 3.5inch Bay (hot plug)
Standard Drive Cage
Mountable I/O Options
High
Low
Memory
DIMM Slot 2A
DIMM Slot 2B
DIMM Slot 1A
DIMM Slot 1B
DIMM Slot 0A
DIMM Slot 0B
Xeon®
3.60EGHz/3.2EGHz
/ 3EGHz (2MB)
Bay 1
SCSI
Bay 2
SCSI
Bay 3
SCSI
Bay 4
SCSI
Bay 5
SCSI
Bay 6
SCSI
3.5 inch HDD Bay 6
(hot plug)
3.5 inch HDD Bay 5
(hot plug)
3.5 inch HDD Bay 4
(hot plug)
3.5 inch HDD Bay 3
(hot plug)
3.5 inch HDD Bay 2
(hot plug)
3.5 inch HDD Bay 1
(hot plug)
Hard Disk 3.5inch Bay (hot plug)
with Internal HDD Unit Bay Conversion kit (PG-BC102
To Next Page
Loading...
Need help?
General