Fujitsu PRIMERGY TX200 S7 - Page 22

System configurator and order-information guide
L
PRIMERGY TX200 S7 Status 2014-01-30
Section
VII
External SAS Disk Array
Controller depends on I/O-Module
IOM available: - SAS/SATA; - USB
SAS RAID controller for JBOD subsystems
as long as available as soon as available
S26361-F3593-E1 S26361-F3713-E1
S26361-F3713-E3
RAID Ctrl SAS 6G 8port external RAID Ctrl SAS 6G 8port external
RAID Ctrl SAS 6G 8port ext. V3
LSI MegaRAID SAS9280-8e LSI MegaRAID SAS 9285-8e LSI MegaRAID SAS 9286-8e
512MB Cache with ECC 1GB Cache with ECC 1GB Cache with ECC
RAID 0, 1, 10, 5, 50, 6 & 60 RAID 0, 1, 5, 6, 10, 50 & 60 RAID 0, 1, 5, 6, 10, 50 & 60
without iBBU without FBU without FBU
SAS 6Gb/sec SAS 6Gb/sec
SAS 6Gb/sec
8 port external 8 port external 8 port external
2x PCIe x4, MD2 form factor PCIe x8, MD2 form factor PCIe 3.0 x8, MD2 form factor
full height bracket full height bracket full height bracket
max. 2x per system
max. 1 per system max. 1 per system
S26361-F3257-E216 S26361-F3669-E125
Cache Battery Backup Unit Flash Backup Unit
with 16cm cable set with 25cm cable set
max. 1x per Controller max. 1x per Controller
as soon as available
Advanced Software Option
S26361-F3669-E661
as soon as available
2x, but
RAID Advanced Software Options S26361-F3669-L661
max. 3x
License Activation Key RAID Advanced Software Options
RAID ctrl
for CacheCade 2.0 and FastPath License Activation Key
int. and ext.
for 1 Controller for CacheCade 2.0 and FastPath
in total for 1 Controller
SAS-controller for
external backup drives
BBU max.2x per system possible
S26361-F3628-E1
for loose delivery of the Cache
SAS Controller 6Gb/s 8 port
Battery Backup please order
LSI SAS9200-8e
S26361-F3257-L210
2x
SAS 6Gb/sec
ext: 8 port
PCIe 2.0 x4,
max. 2x per system
M
Fujitsu PRIMERGY Server 22 of 28