Fujitsu PRIMERGY TX200 S7 - Page 27

System configurator and order-information guide
Q
PRIMERGY TX200 S7 Status 2014-01-30
Section
XI
System Management Produkts (RemoteView)
iRMC S3 (integrated Remote Management Controller) onboard server management
Controller with dedicated 10/100/1000 Service LAN-port and integrated graphics.
Optional 10/100 Service LAN-port on front panel.
The Service LAN-port can be switched alternatively on standard Gbit LAN port
S26361-F1790-E242
iRMC S3 advanced pack
integrated remote management controller
activation key for
graphical console redirection
and remote media redirection
max. 1x per system
S26361-F2571-E27
Maintenance LAN
Front management LAN Port
In combination with iRMC adv. pack
For local maintenance / console redirection,
Integrated in front (operating panel)
max. 1x per system
Section
XII
Miscellaneous
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist
These options are supplied lose with the shipment
For suitable peripherals for this product, please refer to SystemArcitect
S26361-F3776-E2
Configuration restrictions in LNM for TX200:
ENABLING LOW NOISE MODE TX200
Max 4x 3.5" SATA HDDs are allowed! No SAS or 2.5" HDDs!
Restricts configuration to make
Max 1x PSUs is allowed! No redundant PSU!
LNM possible
No redundant fans are allowed!
LNM is enabled ex factory
No PCIe cards are allowed!
max. 1x per system
LNM can be enabled later, as long as the configuration restrictions are fulfilled
When adding not compatible components later, LNM will be switched off automatically
Section
XIII
Country specific Options
S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130
REGION KIT APAC/EMEA/India REGION KIT JP REGION KIT America
For Shipments to Asia pacific, For Shipments to Japan regions For Shipments to America
EMEA or India regions
1x per system 1x per system 1x per system
A power cord has to be ordered:
- once per basic unit and additional a second power cord
- if an additional hot plug, redundant power supply modul is ordered
Power cord options (1x per PSU) Power cord options (1x per PSU)
1.8m, grey
T26139-Y1740-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR T26139-Y1968-E100 Powercord for rack, 4m, grey,
T26139-Y1742-E10 USA, Canada IEC 320 C14 connector
max.2x T26139-Y1743-E10 Switzerland
T26139-Y1744-E10 UK, IR T26139-Y1742-E10 USA, Canada, 1.8m, grey
T26139-Y1745-E10 Italy
T26139-Y1746-E10 Denmark
T26139-Y3850-E10 Option "no powercord", for Countries without T26139-Y3850-E10 Option "no powercord", for Countries without
specific cable orderable like e.g. China specific cable orderable like e.g. China
Option for Floorstand
USB keyboards for floorstand versions for following countries:
USB standard
USB professional
Keyboard KB520 Keyboard KBPC PX ECO
S26381-K520-E170 Switzerland S26381-K341-E170
S26381-K520-E104 Czech/Slovak S26381-K341-E104
S26381-K520-E120 Germany S26381-K341-E120
S26381-K520-E180
Spain
S26381-K341-E180
S26381-K520-E140 France S26381-K341-E140
S26381-K520-E165 United Kingdom S26381-K341-E165
S26381-K520-E185 Italy S26381-K341-E185
S26381-K520-E154 Sweden / Finland S26381-K341-E154
S26381-K520-E102 USA / international S26381-K341-E110
option for floorstand
Optional Mouse
S26381-K457-E100
Mouse M510 black
S26381-K457-E101 Mouse M510 grey
Options and other peripherals
For other options, refer to SystemArchitect and Pricelist.
These options are supplied lose with the shipment.
For suitable peripherals for this product, please refer to SystemArcitect.
End PRIMERGY TX200 S7 floor
PRIMERGY TX200 S7 19" Rack
PRIMERGY TX200 S7 Floorstand
Fujitsu PRIMERGY Server 27 of 28