Fujitsu PRIMERGY TX200 S7 - Page 4

System configurator and order-information guide
PRIMERGY TX200 S7 Status 2014-01-30
Configuration diagram PRIMERGY TX200 S7 SFF (2.5") System Unit
System unit ( I )
SIDE VIEW FRONT VIEW
red. Fan / PSU Kit 3 x 5.25" bays available
1. PSU
standard
3 x HH 5.25" free or
or
Power
2 x HH 5.25" free + Option A or
2. PSU
Supply
1 x HH 5.25" free + Option D or
(red. + hot plug)
0 x HH 5.25" free + Option A + Option D
std. PSU + std. Fans
Option D
or 8x 2.5"
red. hp PSU + red. Fans
Depending on Base Unit
Option A Option A
Processor ( II ) 1.6 * 5.25" 1.6 * 5.25"
1st Xeon 4C, 6C or 8C
2nd Xeon 4C, 6C or 8C
CPU incl. Heatpipe CPU incl. Heatpipe
II / A II / B II / C II / D II / E II / F
Accessible drives ( V )
I / A I / B I / C I / D I / E I / F
Mounting Kit DVD(sl) + LSD: (Option A)
Memory ( III ) - support for SL (0.5") DVD Drive + LSD
each CPU offers 2 Banks ( I and II ) with 3 Channels each
- occupies one 5.25" bay
Channels D, E, F are only available if 2nd CPU is configured
optional SFF SAS/SATA HDD extension Box: (Option D)
- support for 8x 2.5" (SFF) SAS/SATA HDD hot plug
Extension slots
- occupies two 5.25" bays
SAS Controller ( VII )
Disk Array ( VIII )
Communication/Network ( IX )
Miscellaneous ( X ) Hard disk drives ( VI )
Slot 6 PCIe-3 x16,170 mm @ CPU2
this slot is only available with 2 CPUs implemented
Slot5 PCIe-3 x4, 280 mm @ CPU1
Possibility to install PCIe x8 cards; 1st pref. RAID Slot
Slot 4 PCIe-3 x16, 280 mm @ CPU1
Slot 3 PCIe-3 x4, 280 mm @ CPU1
Possibility to install PCIe x8 cards
Slot 2 PCIe-2 x4, 235 mm @ PCH
Possibility to install PCIe x8 cards; 2nd pref. RAID Slot
Slot 1 (5V): PCI 32-Bit/33MHz, 280mm @ PCH
Key:
Included in basic unit
Option
2.5" (SFF) SAS/SATA
Slim DVD
Slim DVD
1.6 * 5.25"
2.5" SAS/SATA
2.5" SAS/SATA
2.5" SAS/SATA
2.5" SAS/SATA
2.5" SAS/SATA
2.5" SAS/SATA
1.6 * 5.25"
Air - Channel
LSD Option
LSD Option
not used
Fan 1
3x 120 mm Fans (no redundancy)
Fan 3
8 port SAS Backplane
Fan 2
2.5" (SFF) SAS/SATA
2.5" (SFF) SAS/SATA
2.5" (SFF) SAS/SATA
8x SFF HDD Frame
2.5" (SFF) SAS/SATA
not used
2.5" (SFF) SAS/SATA
2.5" (SFF) SAS/SATA
2.5" (SFF) SAS/SATA
2.5" SAS/SATA
2.5" SAS/SATA
Air - Channel
1.)
Fan4 for Redundancy
6 PCI-Busses
2.)
6.)
5.)
4.)
3.)
Fujitsu PRIMERGY Server 4 of 28