11
10. Installing a KVM Switch
To install a KVM switch, follow the instructions in the user's guide of the KVM Integration Kit.
For more information on KVM switches that can be installed, contact the store where you
purchased the device or a Fujitsu maintenance representative.
When you install a KVM switch, make sure that the power cable of this
device is not plugged into a power outlet, to avoid an electric shock or
short circuit.
This device contains components that generate or accumulate high
voltage electricity. Before you install a KVM switch, make sure that the
device has been properly discharged.
Be careful not to injure yourself with the edges of the metallic parts.
Be careful to prevent getting any foreign substances such as metallic
pieces, water or other liquids inside the device, to avoid damaging it.
Also, do not touch any parts of the device not related to your work.
CAUTION
To Next Page
Loading...
