Fujitsu RC25 - Removing the RC25 Rack Mount Kits

6
8-2-2. Removing the RC25 Rack Mount Kits
(1) Loosen the finger screws on the right and left front ends, and then remove the slide fixing
brackets.
(2) Remove the RC25 Rack Mount Kits. Push the fixing springs to unlock the RC25 Rack
Mount Kits, and then pull them out backwards.
(3) Unlock the intermediate member locks of the slide rails () and store the intermediate
members in the outer members.
(4) Remove the spring locks on the rear
side of the RC25 Rack Mount Kits.
Removin
g
the RC25 Rack Mount Ki
t
s



Finger screws
Intermediate member
RC25 Rack Mount Kits
Rack Console
Slide fixing bracket
for transport
Fixing
spring

Spring lock


Retainer
Intermediate member
lock
 Lift the tilted lock.
 Push the intermediate
member.
Intermediate member
Outer member