24
2. The monitor display looks strange
Symptom Cause Action
Grid screen that flickers. The monitor is unfocused. Adjust the focus of the monitor.
Vertical stripes are visible. Monitor adjustment is not
correct.
Adjust the clock, and then adjust
the focus.
The display position setting is
not correct.
Adjust the clock, and then adjust
the display position.
Display is larger or
smaller than the monitor screen.
The current resolution (mode) is
different from the standard
display setting.
Change the server settings to
use the standard display
resolution (mode).
Sometimes no images are
displayed on the monitor.
The power plug is not fully
inserted.
Make sure the plug is fully
inserted.
Focus or clock adjustment is not
correct.
Adjust the clock, and then adjust
the focus.
Letter weights are different
across the monitor.
The resolution is lower than
1280 1024.
Letter weights may also be
intentionally different because a
digital magnification is used.
Set the monitor resolution to
1280 1024 in "Monitor
Properties".
The screen flickers. The resolution is lower than
1280 1024.
When the resolution is not 1280
1024, the screen may flicker.
In such a case, change the
refresh rate.
3. Monitor cannot be adjusted
Symptom Cause Action
Automatic adjustment using the
AUTO/EXIT button does not
work and the following message
is not displayed:
"AUTO Processing"
Automatic adjustment was
performed with an extremely
dark monitor background/image.
Make the monitor image as
bright as possible, and then
press the AUTO/EXIT button to
redo automatic adjustment.
To Next Page
Loading...
