Fujitsu ScanSnap S1500M Getting Started Guide

2
Safety Precautions
The provided "Safety Precautions" document contains
important information about the safe use of the Scan-
Snap. Before using the ScanSnap, make sure to read
and understand the information provided in the "Safety
Precautions" document.
Symbols Used in This
Manual
The following symbols are used in this manual.
Referring to the "Operator's
Guide"
To refer to the "Operator’s Guide", insert the Setup DVD-
ROM in to the DVD-ROM drive, and follow the procedure
below.
Click the [Documents] button in the [ScanSnap Setup]
dialog box, and then the [ScanSnap Manager] button.
Double-click the [Operator's Guide] icon in the [Scan-
Snap] window.
Removing the Protective
Packaging
The ScanSnap comes with a variety of protective packag-
ing attached.
Follow the procedure described below to remove the
packaging before using the ScanSnap.
1. Remove the binding tapes from the back
of the ScanSnap.
2. Open the ADF paper chute (cover) (1),
and pull the tape to remove the protective
foam sheet (2) from the stacker. Open the
stacker (3) and pull the tape to remove the
protective sheet from the ADF top section
(4).
3. Pull the ADF release catch to open the
ADF top section, and pull the tape to
remove the protective card.
Symbol Description
This symbol alerts operators to an
operation that, if not strictly observed,
may result in safety hazards to person-
nel or damage to equipment.
This symbol alerts particularly impor-
tant information. Be sure to read this
information.
This symbol alerts operators to helpful
advice regarding operation.
This symbol indicates operations using
Windows
®
.
This symbol indicates operations using
Mac OS.
CAUTION
CAUTION
If a magnetic card or IC card comes into contact with
the magnets on the ADF top section, the magnetic part
of the card may be damaged.
Binding
tapes
22
1
3
4
Stacker
ADF paper chute (cover)
ADF top section
ADF top section
ADF release catch
Protective
card and tape
Magnets

Fujitsu ScanSnap S1500M Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
Bundled software	Cardiris 3.6, Adobe Acrobat 8 Professional, ABBYY FineReader
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 159 x 158 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.5 x 6.3 x 6.2 \
Minimum storage drive space	2440 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	4.5 W
Power consumption (typical)	35 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	3000 g