8
2. Press the [Scan] button on the ScanSnap.
⇒ Scanning starts.
⇒ The Quick Menu appears when scanning is
completed.
3. Click an icon of the function you want per-
form from the Quick Menu.
⇒ The selected function starts. When using an
application, the application window appears.
⇒ Document scan test is complete.
ScanSnap preparations are complete.
For details about how to operate or use the
ScanSnap, refer to the Operator’s Guide.
Contact for Inquires
Refer to the contact list on the last page of the "Safety
Precautions" document.
If scanning does not start, refer to "Trouble-
shooting" in the Operator’s Guide.
To Previous Page
Loading...
