Fujitsu UTY-RNRYZ2 User Manual

3-3-1 On Timer
(1) Touch the [On Timer] on the
“Timer Setting” screen. When
the “Password Verication”
screen is displayed, enter the
password and touch [OK].
Back
On Timer [Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
Enable the On Timer.
(2) “On Timer” screen is displayed. Touch the [Enable/Dis-
able] on the “On Timer” screen.
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Disable]
Operation Start Time [In 0.5 hr]
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “On
Timer” screen.
Set the Operation Start Time
(4) Touch the [Operation Start time] on the “On Timer”
screen. “Operation Start time” screen is displayed.
(5) Set the time by touching [
] or [ ].
(4) (5)
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Start Time [In 0.5 hr]
Fri 10:00AM
Operation Start Time
Cancel OK
In
hr
0.5
When the [OK] is touched, the display returns to the “On
Timer” screen.
Note
Up to 24 hours can be set.
Apply the setting.
(6) Touch the [OK] on the “On
Timer” screen. After the setting
change screen is displayed,
the display returns to the “Timer
Setting” screen.
On Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Start Time [In 0.5 hr]
3-3-2 Off Timer
(1) Touch the [Off Timer] on the
“Timer Setting” screen. When
the “Password Verication”
screen is displayed, enter the
password and touch [OK].
Back
On Timer [Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
Enable the Off Timer.
(2) “Off Timer” screen is displayed. Touch the [Enable/Dis-
able].
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Disable]
Operation Stop Time [In 0.5 hr]
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “Off
Timer” screen.
Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the “Off Timer”
screen. “Operation Stop Time” screen is displayed.
(5) Set the time by touching [
] or [ ].
(4) (5)
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
Fri 10:00AM
Operation Stop Time
Cancel OK
In
hr
0.5
When [OK] is touched, the display returns to the “Off
Timer” screen.
Note
Up to 24 hours can be set.
Apply the setting.
(6) Touch the [OK] on the “Off
Timer” screen. After the set-
ting change screen is dis-
played, the display returns to
the “Timer Setting” screen.
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
3-3-3 Auto Off Timer
(1) Touch the [Auto Off Timer] on
the “Timer Setting” screen.
When the “Password Verica-
tion” screen is displayed, enter
the password and touch [OK].
Back
On Timer [Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
Enable the Auto Off Timer.
(2) “Auto Off Timer” screen is displayed. Touch the [Enable/
Disable] on the “Auto Off Timer” screen.
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
Enable /Disable [Disable]
[In 30 min.]
[ – ]
Operation Stop Time
Time Range Setting
Auto Off Timer
Fri 10:00AM
Cancel OK
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “Auto
Off Timer” screen.
Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the “Auto Off Timer”
screen.
(5) The “Operation Stop” time screen is displayed. Set the
time with [
] or [ ]. The time can be set within the 30
to 240 min. range in 10 min. increments.
En-5
En-6
9382729004-01_OM.indb 5 2/22/2017 13:26:35

Fujitsu UTY-RNRYZ2 Specifications

General

Brand	Fujitsu
Model	UTY-RNRYZ2
Category	Remote Control
Language	English