6. Select the [Function No.] with pressing the [Cursor button (Left/Right)], and select the Func-
tion No. to be set with pressing the [Cursor button (Up/Down)].
C
ancel
:
OK:
Function setting
Mo
10:00
R.C. Function Setting
address No. No.
Version Error history
00 00 00
7. Select the [Setting No.] with pressing the [Cursor button (Left/Right)], and select the Setting
No. to be set with pressing the [Cursor button (Up/Down)],and press the [Enter button].
C
ancel
:
OK:
Function setting
Mo
10:00
R.C. Function Setting
address No. No.
Version Error history
00 00 00
DESIGN & TECHNICAL MANUAL
- 24 -
ZONE CONTROL
SYSTEM
To Next Page
Loading...
