Full Swing KIT - Usb Charging Port; Download the App

1. CHARGE IT UP
2. DOWNLOAD THE APP
• Remove the charger and cable from the inside pocket of the carrying case
• Gently open the rubber charging port cover on the le side of your Full Swing KIT, aach the
charging cable, then aach the charger to the wall
• Allow approximately 5 hours for a full charge
NOTE: You can pair and congure your KIT while in charging mode.
Please connue in this mode for steps 2 through 4.
To download and install the Full Swing app:
• Scan the QR Code below with your camera:
• Alternavely, search for Full Swing in the Apple App Store®
USB CHARGING PORT