7
TROUBLE SHOOTING GUIDE
Problem Possible Solution
Vacuum will not 1. Check to ensure unit is firmly plugged in.
operate 2. Check house fuse or breaker. Replace fuse or
reset breaker.
3. Check for damaged power cord.
Internal thermal breaker 1. Unplug and allow unit to cool down for
tripped due to overheating 30-35 minutes.
2. Empty dust cup and remove any clogs.
Vacuum will not pick up 1. Turn off unit and unplug from wall outlet.
dirt or suction power Remove dust cup filter and empty dust cup.
is weak Clean and replace dust cup filter. Attach dust cup
to vacuum.
2. Dust cup is not installed properly. Check for proper
installation of dust cup and filter.
Dust escaping 1. Check to ensure dust cup is empty and seated
from vacuum properly on vacuum.
2. Clean and replace dust cup filter.
Vacuum hose 1. Remove hose. Remove obstruction from the hose.
will not pick up 2. Check to ensure dust cup is empty and seated
properly on vacuum.
3. Clean and replace dust cup filter.
Brushroll will not spin 1. Attach hose to hose inlet, listen for click.
2. Check that hose isn’t pushed too far onto hose inlet.
To Next Page
Loading...
