Troubleshooting Guide
For Best Performance
8
• Keep your Fuller Brush vacuum clean and in good operating condition�
• Change vacuum bags once a month or when the bags are 2/3 full to maximize cleaning performance�
• Always use genuine vacuum bags and replacement parts� Use of other products may result in poor cleaning performance,
potential vacuum cleaner damage and may void vacuum warranty� Genuine products are designed for maximum cleaning
performance�
• Use only Authorized Fuller Brush Retailers for parts or service�
• Store your machine carefully in a dry area�
• For optimum cleaning performance and safety, follow your owner’s manual instructions�
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
Vacuum won’t turn on • Power cord not firmly plugged in
• Blown fuse or tripped breaker
• Needs service
• Plug unit in firmly
• Check house fuse or breaker�
Replace fuse/reset breaker�
• Take vacuum to a Fuller Brush
service center�
Vacuum won’t pick up or low
suction
• Vacuum bag full
• Broken belt
• Worn brushroll
• Install new bag
• Replace belt
• Replace brushroll
Dust escaping from vacuum • Vacuum bag not installed
properly
• Install bag properly� Review
bag installation (page 6)
To Next Page
