EasyManua.ls Logo

fully Jarvis - Page 6

fully Jarvis
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6/8/23, 8:59 AM
My Jarvis is stuck. How do I reset it? – Fully
https://legacysupport.fully.com/hc/en-us/articles/12056688477847-My-Jarvis-is-stuck-How-do-I-reset-it-
6/10
 Unplug all cable connections under the desk, including any leg cable(s) at both ends.
 Reconnect all cables except the power cable. Ensure connections are firmly seated.
 Plug the desk back into power.
Reset the Handset
 Press and hold the pad of your finger on the Fully logo until the desk begins to move down.
Don't touch the underside of the handset during this step.
If the desk doesn't immediately start to move down, hold your finger on the Fully logo
again up to 15 seconds, release and hold again.
Repeat this step up to three times until the desk begins to move down.
 Once the desk begins moving down, continue to hold the Fully logo until the desk reaches
its lowest height, dips down slightly, and then pops back up.

Other manuals for fully Jarvis

Related product manuals