Fumex FA5-2 Series - User Manual

FA5-2 Series
Air Filtration System
Operations Manual
READ AND SAVE THESE INSTRUCTIONS
WARNING:
Disconnect from power supply before performing maintenance procedures
such as cabinet cleaning, changing filters or servicing of electric motor or
other electric components.
WARNING:
To reduce the risk of fire or electric shock, do not use this fan with any solid-
state speed control device.
WARNING:
For general ventilating use only. Do not use to exhaust hazardous or
explosive materials or vapors.
WARNING:
Use only a 20-Amp fuse.
CAUTION:
Do not operate without having all filters in place.
Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Arrange cord away from traffic area and where it will not
be tripped over.

Summary

GETTING STARTED

Initial set-up

Steps for unpacking and setting up the FA5-2 unit, including filter placement and verification.

Locating the air cleaner

Guidance on optimal placement for performance and efficiency, minimizing ducting and bends.

Inlet hose attachment

Instructions for connecting the air inlet flange and hose to the unit or pollution source.

Electric power

Information on identifying the correct power supply and fuse requirements for the FA5-2 unit.

CONTROLS

On;Off Switch

Describes the simple touch control and indicator light for powering the unit on/off.

Blower;Fan

Details the variable speed blower with 8 settings and how speed is indicated.

Filter monitoring

Explains how pressure switches monitor filter status and VOC sensor alerts.

GENERAL FILTER CARE

Part # FA540 B - Pre-filter Assembly

Describes the pre-filter as the first stage, its design, and average service life.

Part # FA500 - HEPA Filter

Details the HEPA filter's efficiency (99.97% for 0.3µ particles) and health impact.

GENERAL MAINTENANCE

Part # FA501 D - Gas;Odor Filter

Explains the gas/odor filter's composition and use for industrial processes.

Remote Interface and Connectivity Function

Information on the optional interface for remote control and monitoring capabilities.

Warranty and Liability limitations:

Fumex FA5-2 Series Specifications

General

Pre-filter	Yes, various options available (e.g., particulate, gas)
Secondary Filter	Yes, various options available (e.g., particulate, gas)
Activated Carbon Filter	Yes, various options available for different gas and odor removal needs.
Model	FA5-2 Series
Flow Rate	N/A (This is an air filtration system, not a water filtration system)
Maximum Operating Pressure	N/A (This is an air filtration system, not a water filtration system)
Maximum Operating Temperature	N/A (This is an air filtration system, not a water filtration system)