FUNAI LH840-M22 User Manual (English)

Questions and Answers:

S
Samantha HoganAug 18, 2025
What to do if my FUNAI LH840-M22 LCD TV has no picture or sound?
- K
  Katherine ReynoldsAug 19, 2025
  If your FUNAI LCD TV shows no picture or sound, first try changing the channel to rule out reception issues. Ensure the TV is plugged in and the outlet has power. Also, verify that the unit's power is on and the antenna is properly connected to the terminal on the back. If using an outside antenna, check for any broken wires. As a last resort, turn the TV off and then on again after a minute.
S
Shane WhiteAug 21, 2025
How to fix a FUNAI LH840-M22 LCD TV remote control that isn't working?
- C
  Colleen MorrisAug 21, 2025
  If the remote control for your FUNAI LCD TV isn't working, make sure the TV is plugged in and the outlet has power. Also, check the batteries in the remote control and replace them if necessary.
T
Trevor WeaverAug 23, 2025
Why does my FUNAI LH840-M22 have poor reception on some channels?
- J
  Jason BridgesAug 23, 2025
  If your FUNAI LCD TV has poor reception on some channels, try tuning to a new channel to rule out reception issues. Check that the antenna is correctly connected to the terminal on the back of the TV. If you're using an outside antenna, inspect it for broken wires. Also, check for any local interference that might be affecting the signal.
A
Ashley JenningsAug 26, 2025
What to do if my FUNAI LH840-M22 LCD TV has sound but poor picture?
- N
  Nicole HernandezAug 26, 2025
  If your FUNAI LCD TV's sound is fine but the picture is poor, try changing the channel to rule out reception issues. Ensure that the antenna is connected to the terminal on the back of the unit. If using an outside antenna, check for broken wires. Additionally, check for local interference. You may also want to adjust the contrast and brightness controls.
H
hgoodmanAug 27, 2025
Why is the picture on my FUNAI LH840-M22 LCD TV so weak?
- E
  Eric HolmesAug 28, 2025
  If your FUNAI LCD TV has a weak picture, try changing the channel to rule out poor channel reception. Make sure the antenna is connected to the terminal on the back of the unit. If you're using an outside antenna, check for broken wires. Adjust the contrast and brightness controls. Also, the surrounding temperature might be too low.
A
Anne MartinezAug 30, 2025
Why are there ghosts in the picture on my FUNAI LH840-M22?
- L
  laurenkhanAug 30, 2025
  If your FUNAI LCD TV shows ghosts in the picture, try changing the channel to rule out poor channel reception. Ensure the antenna is connected to the terminal on the back of the unit. If using an outside antenna, check for broken wires. Also, check for local interference.
E
Eric MillerSep 1, 2025
How to fix no color on FUNAI LH840-M22 LCD TV?
- P
  Patricia WillisSep 2, 2025
  If there is no color on your FUNAI LCD TV, try changing the channel to rule out poor channel reception. Check if the antenna is connected to the terminal on the back of the unit. If using an outside antenna, check for broken wires. You can also adjust the [Colour] control.
C
Cynthia JonesSep 3, 2025
Why is the picture distorted on my FUNAI LCD TV?
- J
  Jennifer DiazSep 4, 2025
  If your FUNAI LCD TV's picture is distorted, try changing the channel; the issue might be due to poor channel reception. Check the outside antenna for broken wires if you are using one. Also, the surrounding temperature might be too low.
G
Gregory AllenSep 6, 2025
Why does the picture roll vertically on my FUNAI LCD TV?
- B
  Brooke MclaughlinSep 6, 2025
  If your FUNAI LCD TV's picture rolls vertically, try changing the channel to rule out poor channel reception. If you're using an outside antenna, check it for broken wires. Also, check for local interference.
G
Gina JonesSep 8, 2025
Why does my FUNAI LCD TV have lines or streaks in the picture?
- T
  Travis BrownSep 8, 2025
  If your FUNAI LCD TV has lines or streaks in the picture, try changing the channel to rule out poor channel reception. If you're using an outside antenna, check for broken wires. Also, check for local interference.