FUNKY MONKEY BARS Boxing Bag - Weight Bar Holders Final Installation; Re-assemble Frame and Attach Holders

6
1. Re-attach any frame tubes and fittings that
were removed to enable adding 2x short tees.
(In the shown example - replace swing bar)
Page 23
2. Fully tighten all grub screws.
7
1. Insert 2x weight bar holders
preassembled in step 3.
RE-ASSEMBLE FRAME
ATTACH WEIGHT BAR HOLDERS
+ 360
o
+ 360
o
2. Fully tighten all grub screws.