Page 5
ASSEMBLY INSTRUCTIONS - BOXING BAG
1
CHECK INVENTORY - (not to scale)
Check that you have the following
items before assembling your
Funky Monkey Bars® boxing bag.
2
INSTALL SWING HOOK AND TIGHTEN BOLT
1. Select suitable location for boxing bag.
2. Loosen any neccessary fittings and slide
swing hook onto tube into desired position.
3. Fully retighten any loosened fittings
4. Fully tighten swing hook bolt.
FAILURE TO DO SO COULD RESULT
IN SERIOUS INJURY OR DEATH.
3
HANG BOXING BAG
Lift empty bag and slot hanging
rings into open shackle.
Ensure shackle is fully closed-
Mind your fingers!
1x
Boxing Bag
1x
Swing Hook
1x
Hand Air Pump
o
+ 360
To Next Page
Loading...