WARNING:
DO NOT HANG FROM BOXING BAG AS IT WILL TEAR.
10
1. Ensure all swing hook bolts are firmly tightened.
2. Check that all other grub screws and rung bolts on your frame are fully tightened.
3. The entire Funky Monkey Bars® frame is pegged down.
Please refer to the maintenance steps at the back of the booklet.
FINAL CHECKS
7
CLOSE SPRING VALVE
Press down again on spring
valve to pop the valve back
up into the closed position.
Press down
Closed
Spring valve
1.
2.
8
INFLATE BOXING BAG
Connect air pump to valve
and inflate boxing bag to
desired pressure.
9
TIGHTEN VALVE CAP
1. Remove air pump
2. Screw valve cap located on top
of boxing bag back into place
Tighten
Page 7
Air hand pump
To Next Page
Loading...