Furinno 15044 User Manual

Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Recommended Maximum Weight
Furinno Econ Low Rise TV Stand
1504420180206
MODEL : 15044
*Unit in Pound(lbs)
60
STEP 4
Attach Panel (B) to the assembled unit with
Small Round Leg (6), Round Pole (5) and
Screw (3).
STEP 5
Attach Panel (C) with Small Round Leg (6) and
Screw (3).
STEP 6
6.1 Attach Right Side Panel (E) with Screw (3).
6.2 Lock mini fix cam (2) as shown.
7.1 Attach Left Side Panel (D) with Screw (3) and
lock the Mini Fix Cam (2), as shown.
7.2 Cover the Screw with Screw Sticker (7).
STEP 7
Tool RequiredTool Required
Recomm. 2 Person
Approx. 30 minutes
6
6
7
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
support@furinno.com. Thank you for selecting Furinno!

Furinno 15044 Specifications

General

Brand	Furinno
Model	15044
Category	Indoor Furnishing
Language	English

Summary

Assembly Instruction

Attach Panel B

Attach Panel (B) to the assembled unit with Small Round Leg (6), Round Pole (5) and Screw (3).

Attach Panel C

Attach Panel (C) with Small Round Leg (6) and Screw (3).

Attach Right Side Panel E

Attach Right Side Panel (E) with Screw (3) and lock mini fix cam (2).

Attach Left Side Panel D

Attach Left Side Panel (D) with Screw (3) and lock Mini Fix Cam (2). Cover Screw with Sticker (7).

Maximum Weight Capacity

Important Safety Warnings

Customer Support Information

Parts and Hardware Identification

Hardware Components

List of all hardware pieces required for assembly, including quantities.

Furniture Components

List of all furniture panels and parts, including quantities and labels (A-F).

Pre-Assembly Guidance

Useful Assembly Hints

Advice on reading steps, ordering, sorting parts, protecting furniture, and cleaning.

Assembly Steps

Initial Component Preparation

Instructions for inserting bolts, dowels, cams, and nail legs into panels A, B, C, D, E, F.

Attach Round Pole

Instructions for attaching the Round Pole (5) to Panel (A).

Attach Back Panel F

Instructions for attaching Panel (F) to the assembled unit and locking Mini Fix Cams (2).