EasyManua.ls Logo

Furinno 11156 User Manual

Furinno 11156
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Assembly Instruction
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Upright the unit and fix Panel(G)to the
back of assembled unit using Power Pin(8).
STEP 6
Install Square Leg(7)to Panel(B) using
Screw(2).
STEP 4
Unfold Bin(9)and slide into the unit.
STEP 7
Attach Panel(B)to assembled unit using
Screw(1).
STEP 5
Furinno Entertainment Center
w/2 Bin Drawers
1115620140520
MODEL :
11156
37.8”(W) x 19”(H) x 15.6”(D)DIMENSION :
*Unit in Pound(lbs)
50
10
10
Tools RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 10 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes
Question and Answer IconNeed help?

Do you have a question about the Furinno 11156 and is the answer not in the manual?

Furinno 11156 Specifications

General IconGeneral
BrandFurinno
Model11156
CategoryIndoor Furnishing
LanguageEnglish

Summary

Assembly Preparation Tips

Step 1: Insert Dowels and Cam-Locks

Instructions for inserting dowels and cam-lock nuts into panels C, D, F1, and F2.

Step 2: Attach Panels to Top Panel

Guide for screwing cam-lock screws into Panel A and attaching Panels C, D, and F1.

Step 3: Attach Side and Center Panels

Procedure for attaching Panel E to C & D using screws, and attaching Panel F2 to Panel E.

Product Assembly Procedures

Step 4: Install Square Leg

Instructions for installing square legs (7) to Panel (B) using screws (2).

Step 5: Attach Panel to Assembled Unit

Guidance on attaching Panel (B) to the assembled unit using screws (1).

Step 6: Fix Panel to Back of Unit

Procedure for uprighting the unit and fixing Panel (G) to the back using Power Pins (8).

Step 7: Slide Bin into Unit

Instructions for unfolding Bin (9) and sliding it into the unit.

Important Safety Warnings

Related product manuals