Furinno 11207 User Manual

Assembly Instruction
Customer Service
Tel/Fax: 281.500.9372
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: support@furinno.com
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
Attach Shelf Panel(C)to L/R Side Panel(A)
using Chipboard Screw(1).
STEP 8
Attach Door Panel(E)and Shelf Panel(C)to
completed unit in Step 6,as shown.
STEP 7
Recommended Maximum Weight
Furinno Pasir 4 Tier Bookcase with
Door w/out Handle
1120720140423
MODEL :
11207
15.8”(W) x 41.9”(H) x 9.4”(D)DIMENSION :
*Unit in Pound(lbs)
(1)x 4pcs
(4)x 22pcs
(1)x 4pcs
15
15
15
15
15
Attach Bottom Panel(D)to L/R Side Panel(A)
using Chipboard Screw(1).
STEP 10
Attach Door Panel(E)and Bottom Panel(D)to
completed unit in Step 8,as shown.
STEP 9
Attach Back Panel(F)to assembled unit with Power Pin(4).
STEP 11
Tool RequiredTool RequiredTools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes

Furinno 11207 Specifications

General

Product Name	Furinno 11207
Category	Indoor Furnishing
Material	Engineered Wood
Color	Espresso/Black
Assembly Required	Yes
Finish	Espresso
Shape	Rectangle

Summary

Furinno Pasir 4 Tier Bookcase Assembly Instructions

Assembly Steps 7-11

Instructions for attaching door panels, shelf panels, and back panel to the unit.

Weight Capacity and Safety Warning

Guidelines on maximum load limits, safe usage, and child safety to prevent unit collapse or injury.

Customer Support Information

Contact details and support channels for product assistance, including telephone and email.

Assembly Preparation and Initial Steps

Hardware and Parts List

Identification of all hardware screws, supports, magnets, and panel components required for assembly.

Useful Hints Before Starting

Recommendations for careful reading, part identification, and protecting furniture during assembly.

Assembly Steps 1-6

Instructions for initial assembly stages, including inserting screws, magnets, and attaching panels.