Furius FLEX 121 - Installation

YEAR
WARRANTY
10
Direct current (DC)
Electrode +
Electrode -
Dutty cycle
Rated imput current
Rated welding current
Rated input power
Rated open circuit voltage (OCV)
Rated input voltage
Rated load V
AC, rated frequency 50 Hz, workable frequency 60 Hz.
Power (KVA)
Percent dutty cycle
Output range. Rated minimum and maximum welding current and related
load voltage
Voltage (V)
Current (A)
x
I1
I2
P1
U0
U1
U2
...V
...A
...KVA
...%
...A/...V
~
...A/...V
+ : “+”
- : “-”
FCAW SS Self Shield
INSTALLATION
If you use direct current for welding, you must connect the machine as indicated below. For alternating
current, there is no polarity requirement.
DCEP: Electrode connected positive, for MMA or SMAW process applications.
DCEN: Electrode connected negative, for MMA - SMAW - TIG - GTAW - FLUX CORED SS
(SELF-SHIELD) process applications.