Need help?Do you have a question about the Furman Elite15PF and is the answer not in the manual?
General| Input Voltage | 120V |
|---|---|
| Output Voltage | 120V |
| Maximum Current | 15A |
| Surge Protection | Yes |
| Rack Mountable | Yes |
| Filtration | Yes |
| Amperage | 15A |
| Voltage | 120V |
| Spike Protection | Yes |
| Type | Power Conditioner |
Inspect carton for damage, save packing materials, check contents, and contact service if items are missing.
Read all safety instructions. Do not disassemble or modify. Keep away from moisture and foreign objects.
Connect to a 15 Amp source. Using a 10 Amp outlet may cause nuisance tripping if current draw exceeds 10 Amps.
Place on flat surface using rubber feet or remove feet for rack mounting. Ensure adequate ventilation.
Connect the AC cord to the unit and then to the wall outlet. Ensure proper connection for safety.
Use for critical video components like DVD players, projectors, plasma, or LCD screens.
Use for components not requiring high current, excluding amplifiers and subwoofers.
Connect all power amplifiers, receivers, and powered sub-woofers to these dedicated outlets.
Understand PFC impact on perceived load. PFC increases perceived current load, potentially affecting circuit breaker trips.
Control brightness of LED lamps. Lights turn off when fully inserted flush to the front panel.
Audible 'clack' on power. Performance may improve after two weeks of continuous use/break-in.
Monitors AC faults and provides extreme voltage shutdown. The Extreme Voltage LED indicates issues.
Protects against high voltages by shutting down power. Explains extreme voltage cutoff thresholds.
Blue LED indicates clamping voltage may be compromised. Unit may need service if it dims.
In-line surge suppression for phone, cable, and satellite. TIVO and HD-Digital ready.
Covers defects for three years from purchase. Registration required for full term.
Covers equipment damage from transient voltage up to $500 deductible. Proper connection is crucial.
To Next Page
